link 2000

Newsletter

MDC-i4220CDN  MDC-i4220TDN Maximize

MDC-i4220CDN MDC-i4220TDN

MDC-i4220CDN  MDC-i4220TDN

More details

MDC-i4220CDN MDC-i4220TDN

IP Box Camera
1/3" 960H High Sensitivity CCD
Color: 700 TV Lines / B/W: 800 TV Lines
H.264, MJPEG (H.264 High Profile @ Level 3.1) Dual Streaming
Max 30FPS at D1 Resolution (NTSC Mode)
Max 25FPS at D1 Resolution (PAL Mode)
Multi Protocol, 2Way Audio, Built-In Motion Detection, Privacy Mask Support
E-Mail Notification, DNS, UPnP, SNMP Support
1ch Alarm Input and 1ch Output, 1ch Two Way Audio
Built-In Micro SD Card Slot (Up to 32GB)
USB Slot for Wi-Fi Antenna, or Wi-Fi Dongle
Built-In PoE Module (Class 0)
Onvif Compliance

MDC-i4220CDN / MDC-i4220TDN
Camera
Image Sensor 1/3" 960H High Sensitivity CCD
Total Pixels NTSC: [1020(H) x 508(V)] / PAL: [1020(H) x 596(V)]
Effective Pixels NTSC: [976(H) x 494(V)] / PAL: [976(H) x 582(V)]
Sync System Internal
Horizontal Resolution Color: 700 TV Lines / B/W: 800 TV Lines
Effective Video Resolution Max 720 x 576
Minimum Illumination MDC-i4220CDN
30 IRE: Color: 0.1 Lux / BW: 0.02 Lux / Sens-up: 0.00001 Lux / F1.2
50 IRE: Color: 0.3 Lux / BW: 0.06 Lux / Sens-up: 0.00007 Lux / F1.2
MDC-i4220TDN
30 IRE: Color: 0.1 Lux / BW: 0.04 Lux / Sens-up: 0.00001 Lux / F1.2
50 IRE: Color: 0.3 Lux / BW: 0.08 Lux / Sens-up: 0.00007 Lux / F1.2
Number of Effective Pixels 976 x 582, 560K pixels
Electronic Shutter Speed NTSC: 1/60sec ~ 1/100,000sec, PAL: 1/50sec ~ 1/100,000sec
S/N Ratio More than 52dB
AGC Compensation Middle: More than 18dB
High: More than 24dB
Exposure Control Shutter, AGC, DWDR, Smart 3D NR, BLC, HSBLC
White Balance Mode ATW / AWB / INDOOR / OUTDOOR / MANUAL / AWC
Lens Type CS Mount Lens Applicable
ICR MDC-i4220CDN (Digital Day & Night) / MDC-i4220TDN (True Day & Night)
Digital Effect Digital Image Stabilizer, De-Fog
Mirror OFF / MIRROR / V-FLIP / ROTATE
Freeze ON / OFF
Sharpness 0~31 Level Select
Sens-up Auto / Off
Image
Codec Image Size (H x V) 176 x 112(NTSC), 176 x 114(PAL), 352 x 240(NTSC), 352 x 288(PAL)
704 x 480(NTSC), 704 x 576(PAL), 720 x 480(NTSC), 720 x 576(PAL)
Video Compression Format H.264, MJPEG (H.264 High Profile @ Level 3.1)
Scanning System De-Interlacing -> No tearing Effect
Codec Streaming Dual Streaming (H.264/H.264 & H.264/MJPEG)
Maximum Frame Rate H.264: 30fps / 720 x 480, MJPEG: 30fps / 720 x 480
H.264: 25fps / 720 x 576, MJPEG: 25fps / 720 x 576
Scene Control
Motion Detection Control Yes (144 Motion Areas, Sensitivity Level Controllable)
Privacy Mask Control Yes (Up to 8 Privacy Mask Areas)
Network
Support Protocol HTTP, TCP/IP, telnet, ftp, NTP, RTP/RTSP(Unicast/Multicast), SMTP, DHCP PPPoE, UPnP, RARP, PPP, PAP, CHAP, UDP, SNMP, ARP, ICMP, Onvif
Frame Rate & Bandwidth Control 6 Levels: Low Compression / Highest / High / Normal / Low / Lowest
CBR, VBR, GOP Control
Device Management Multi user level protection for Camera access PTZ, Alarm I/O
Alarm Management [ Trigger Condition ]
Motion detection / Alarm Sensor / Camera Connect, Disconnect /  Boot Finished
Serial Input
[ Alarm Service ]
Up to 5.6M memory for Pre/Post alarm buffer
E-Mail, FTP, IP notification, Alarm Notification to e-mail
CGI Call by event or schedule
UART Built-in PTZ device is controlled through AUX
UART control X10 device
Dial in/out via PSTN or GSM modem
Number of Client  16 Multiple Clients Accessible
Onvif Conformance Yes
Dynamic Domain Name Yes (IPCCTVDNS) (www.ipcctvdns.com)
Live Casting Streaming Video Channels with full duplex live audio up to max 25fps @ D1
Audio Encoding 8 bit PCM (G.711-u-low), Sampling rates 8KHz, Mono Audio
Security Channel based user password protection for live-cast, PTZ, alarm output
and audio
Installation & Maintenance Configuration: installation wizard, HTTP, telnet and console. Upgrade
firmware: HTTP, telnet & ftp.
System Hardware 32bit Embedded CPU
NAND Flash 128Mbytes / DDR2: 128Mbytes
Linux version 2.6.xx operating system
Battery backed up real-time clock
Miscellaneous OSD (On-Screen Display)
Transmit serial input data with video
Quick Time & VLC media player compatible
Interface
Ethernet 10/100-Base-T Ethernet (Auto-Sensing)
Power over Ethernet Built-In PoE, IEEE802.3af (Class 0)
Audio Input & Output 1 Audio Input / 1 Audio Output (G.711)
Audio Input Input Impedance : 4 KOhm
Pantom Power : 3.3 Volt
Gain : 20 dB
Jack : 3.5mm Mono
Audio Output Output Impedance : 160 Ohm
Output Power : 50 mWatt
Output Voltage : Peek To Peek 1 Volt
Jack : 3.5mm Stereo
Alarm Input & Output 1 Photo-Coupled or 1 Digital Input (NC/NO selectable), 1 Relay Output
Video Output Composite 1.0Vp-p(75 load)
Serial Port COM Port: RS-232
COM ports for console, serial input/output device
Max Baudrate: 115,200 bps
Micro SD Card Slot Built-In, Dynamic Search and Playback Function, Up to 32 GB
Wi-Fi Optional Wi-Fi Antenna or Dongle (IEEE 802.11 b/g standard)
General
Weight Approx 0.4kg
Dimensions 73mm  x 70mm  x 133mm
Power Requirements MDC-i4220CDN: 12VDC, 350mA
MDC-i4220TDN: 12VDC, 450mA
Power Consumption Max 5.5W
Working Temperature (-)40 ~ (+)50 
Operating Humidity 95% RH Max
Standard CE, FCC